Home > Product > REXTAR Series > Rextar-X 

Rextar-X is the latest, upgraded and totally new design among
Rextar series.

We put a lot of consideration and effort to create Rextar-X.
Users can operate Rextar-X only by one hand.
Operation software is more powerful by adopting smart buttons.
Our highest technical specifications are world best among exisiting
portable X-ray units.

Smart Buttons memorize your needs.

Rextar-X has four new buttons on display.
These buttons are same as channel buttons on TV remote control.
If you have typical patient types, you can categorize them into four cases.
For these four cases, you can set up the exposure values onto each smart button. After that, you can take X-ray by only three steps, Power on -> Press one of four smart buttons --> Press exposure button.
Or you can change the values as per your needs.
The buttons indicate patient types (Adult or Child) and types of teeth (Upper, lower - Canine tooth, Molar tooth)

Designed for one hand operation

To take dental X-ray, operators have to position devices and place
sensors or film to patients' teeth. And conventional portable
X-ray equipment should be handled by both hands due to heavy
weight and all function buttons are spread in right and left sides.
So users need assistants or ask patient to hold film or sensor.

But Rextar-X has been designed with a hand strap, and power
button and exposure button are placed in one side. And compact
size and light weight can make you to operate it by one hand only.
You can use one hand for holding X-ray and the other hand for
positioning or controlling patients.

High-Quality portable X-ray system

  • All Rextar series have the highest technical specification among portable X-ray devices.
    It contribute for both image quality and safety.
Product REXTAR Series General Portable X-ray
X-ray Tube Special (Toshiba D-041) General
Tube Voltage / Current 70kV / 2mA 60kV / 1 or 2mA
Focal Spot 0.4mm 0.8mm
Target Angle 12˚ 20˚

Designed with Safety in mind

  • 1. Built-in leaded Double-Shield.
  • 2. Ergonomical design reduce risk to exposure by scattered radiation.
  • 3. Reliable safety protects user to stay with patient during X-ray procedure.
  • ▶More information

Compatible with all sensors

All digital USB type sensors existing in the world can be detected for the REXTAR-X
(Conventional Film, Digital Imaging Sensor, Phosphor Plates)

Upgraded Battery

The REXTAR uses battery as a power source. Hundreds of images can be obtained from one time charge, provides up to 300 exposures. It is rechargeable and you can charge it by using battery charger. Our company worked in close collaboration with Samsung on the upgrade of the battery model. Now, User can use it with satisfaction for better Specification of the new battery.
Tips for extending battery Life


We provides
Rextar core
Cone 1 (40mm)
Cone 2 (140m)
Hand Strap
Neckpiece to be attached to the core
Carrying case
Operation and Service Manual
Battery charger
Power code
Option (Additional charges)
Digital Sensor, Hand switch, Positioning stand
Stand information
stand information

Technical Specification

Input power X-ray Unit 19 VDC 3.16A
Battery Charger 100-240 VAC, 50~60Hz 1.7A
Output power 140W
Power Supply 11.1 VDC (Battery)
Battery 11. 1 V
Frequency 70kHz
Tube kV/Ma 70kV/2mA(Fixed)
Max. Deviation Kv ±4%
MAs ±10%
X-ray Tube Model Name D-041
Inherent Filtration Min. 1.0mmAl
Focal Spot size 0.4 X 0.4 mm
Total filtration 1.5mm
Weight 1.6kg